Accordion folded underlay for SPC, WPC, LVT
Sub-floor levelling 0,8 mm
Thermal insulation 0,055 m2K/W
Compression resistance 20t/m2
Sound insulation 19 dB
Compressive strength 200 k/Pa
Easy installatoin and quick laying
Color: green
Size: 1050х10000×1.5mm
Quantity/pack, m2: 10.5
Number in the box: 12
Quantity/box,m2: 126
Material: modified XPS
Flooring: LVT/SPC/WPC
Supplied in: Accordion-folded
Thickness, mm: 1.5
Key characteristics:
General features: Prolongs the life of theLVT floor locking system
Antibacterial properties: The underlayment possesses bactericidal and fungicidal properties, and specifically effective against: Aspergillus brasiliensis (ATCC 9642), Penicillium funiculosum (ATCC 11797), Chaetomium globosum (ATCC 6205), Trichoderma virens (ATCC 9645), Aureobasidium Pullulans (ATCC 15233)» (According to the studies conducted by Intertek Testing Services Taiwan Ltd.)
Description: Underlay is made from extruded polystyrene (XPS) and is intended for all kinds of «floating» heated floors LVT, SPC, WPC. The surface of underlay is fitted with holes ideal for distribution of hot air from heating system. The flooring manufacturer recommendations should always be followed when laying the floating floors (parquet flooring, laminate flooring). Unless contradictory to the flooring manufacturer data, the following guidelines shall be followed for the underlay: 1. The surface of the concrete floor on which the underlay will be laid must be dry. 2. Underlay without the vapor sealing layer shall be laid over the vapor sealing film spread on the concrete. 3. Starting from the comer of the room, spread the underlay sheet across the direction in which the laminate flooring or parquet flooring will be further laid, proceed gradually on the entire surface. 4. Leave a gap of approximately 5 mm near the walls along the room perimeter. Use metallized adhesive tape Solid Aqua Stop for efficient and tight attachment of sheets to each other. Attention! Do not glue or attach the underlay sheets to the floor or walls! Do not install the underlay in several layers.
Size: 1050х10000×1.5mm
Quantity/pack, m2: 10.5
Number in the box: 12
Quantity/box,m2: 126
Material: modified XPS
Flooring: LVT/SPC/WPC
Supplied in: Accordion-folded
Thickness, mm: 1.5
Key characteristics:
- Load resistance /
General features: Prolongs the life of theLVT floor locking system
Antibacterial properties: The underlayment possesses bactericidal and fungicidal properties, and specifically effective against: Aspergillus brasiliensis (ATCC 9642), Penicillium funiculosum (ATCC 11797), Chaetomium globosum (ATCC 6205), Trichoderma virens (ATCC 9645), Aureobasidium Pullulans (ATCC 15233)» (According to the studies conducted by Intertek Testing Services Taiwan Ltd.)
Description: Underlay is made from extruded polystyrene (XPS) and is intended for all kinds of «floating» heated floors LVT, SPC, WPC. The surface of underlay is fitted with holes ideal for distribution of hot air from heating system. The flooring manufacturer recommendations should always be followed when laying the floating floors (parquet flooring, laminate flooring). Unless contradictory to the flooring manufacturer data, the following guidelines shall be followed for the underlay: 1. The surface of the concrete floor on which the underlay will be laid must be dry. 2. Underlay without the vapor sealing layer shall be laid over the vapor sealing film spread on the concrete. 3. Starting from the comer of the room, spread the underlay sheet across the direction in which the laminate flooring or parquet flooring will be further laid, proceed gradually on the entire surface. 4. Leave a gap of approximately 5 mm near the walls along the room perimeter. Use metallized adhesive tape Solid Aqua Stop for efficient and tight attachment of sheets to each other. Attention! Do not glue or attach the underlay sheets to the floor or walls! Do not install the underlay in several layers.
